2 -
20 dm3 (litres)
4.10 dm3 (litres)
170 mm (per fork leg) (*) (MTS1200 S ABS)
720 cc (per fork leg) (*) (MTS1200 S ABS)
SHELL Advance Coolant or Glyco SHELL 35-40% + water
2.3 dm3 (litres)
(*) The value refers to the air column between the free surface of the oil and the end of the sleeve, with the latter fully lowered and without the preload pipe and spring inside the fork leg.
Important
Do not use additives in fuel or lubricants.
Engine oil
A good quality engine oil has special properties. Use only a highly detergent engine oil with certified SE, SF or SG or higher service ratings as marked on the container.
Viscosity
SAE 15W-50
The other viscosity grades specified in the table can be used where the average ambient temperatures are within the limits shown.